9/3/15

DIY Decoupage Photo Craft Kit + product review #InstagramPhotoProject


closeup of final project reflected in mirror
Ready for a fast and fun DIY wall decor project? The generous folks over at Global Backyard Industries sent me a free 12 Piece DIY Decoupage Photo Kit to test out. I had a great time making this and am excited to share it with you today!

Disclaimer: I received this Decoupage Craft Kit in exchange for an honest & unbiased review.  All opinions expressed here are my own. 


This craft kit comes with six 4"x4" wood painting panels, two 4 oz. bottles of Mod Podge decoupage medium (1 mat, 1 glossy), 4 foam brushes, and a PDF with easy to follow project instructions. With 4 brushes this kit is also good for groups. Plus, wet Mod Podge cleans up easily with water so making this a perfect project to do with kids (or just someone messy, like me). When you are done you will have a cool gallery wall display.


You will also need your awesome photos, a ruler, a craft knife or scissors and a small cup to hold the Mod Podge you're using. I just trimmed down a giant plastic cup for easy clean up.


The square format of the panels is perfect for those instagram photos you are always wondering what to do with. Of course, any kind of photo can be trimmed to fit. I used some closeups of my roses. 


Once your photos are 4" square, open up either either bottle of Mod Podge. First shake the bottle well, then remove the cap and pull off the protective foil. Replace the cap and pour a bit into your cup. Next:

Apply a light, even layer of Mod Podge (I went with the gloss finish) to the front of the wood panel using a foam brush (top left pic). Carefully place your photo on the wet panel. Don't worry if there is a little extra paper hanging over the edge of the wood. It will be easy to remove later. 

Use a plastic card to lightly apply pressure to the photo. Gently drag over photo to remove possible air bubbles trapped underneath. Be careful not to tear your picture. 

Let the photo panels dry at least 30 minutes. You do not want to apply your top coat over the photo until the adhesive layer is dry. Otherwise the image may wrinkle. In the meantime, rinse your brush with water or cover in plastic wrap, so it doesn't stiffen. Also cover any remaining decoupage medium in your cup so it does not dry out.

If needed, trim any extra photo sticking out. You may not need this step; I was a bit sloppy when cutting the original photo to size. 

Once the adhesive is dry, add a top coat of Mod Podge. (bottom right pic in above photo). Use either Glossy or Matte (for a satin finish). Spread an even, light layer of Mod Podge over your photo, moving in one direction. This layer will look white at first but will dry clear. Please note, the PDF instructions mention that any brush strokes, dust, etc will show up in your final top coat. The top coat should be dry to the touch in about 30 minutes. The instructions state that it is best to leave it for 48-72 hours so there will not be a "sticky finish".


Here is a short video of this project. I'll thank you now for your patience. I managed to make a ton of technical errors. In fact, there are so many glitches that I considered bagging it. But then figured, ehh, what the heck.


Here are my final panels. I like the clean look and the depth of the panels. The surface is good as long as there is no glare. In a bright light or up close you can see brush strokes. I generally prefer a smooth finish. I have not used Mod Podge in at least 20+ years, so I am guessing it wasn't applied it correctly.

I may embellish these photos a bit, maybe follow the petals' edges with a non-water soluble marker or a little acrylic paint. Then do one more topcoat - this time with curling brushstrokes in different directions, following the flower's highlights and shadows. This might add an interesting painterly effect. I am also tempted to do play with the sides, maybe paint or add some text. But the clean look of the birch is nice too.


I really enjoyed this project. It takes your photo display to a new level, with the deep sided panels giving a professional look. This a great way to enjoy your pictures without having to get them framed or paying a lot for prints on gallery wrapped canvas.

The kit includes quality supplies. I am crazy about these birch & poplar panels! I'd like to order some more and draw and paint directly on them. They are very sturdy and have an attractive grain and smooth finish. The foam brushes are standard and do the job without falling apart. They also clean up easily. And the amount of Mod Podge supplied is much more than the project needs, so I have a lot left for future projects.

The only thing lacking in this bundle is perhaps some kind of hanging hardware. You can hang the open back directly on a nail, but I will feel more comfortable displaying them once I add some wire or a sawtooth hanger. Alternatively the sides are so thick that your photos can be displayed standing up on your mantle, desk or other surface. 

So, where can you find this cool crafty kit? Click here to check it out on Amazon (This is not an affiliate link. I don't profit from items purchased)

Need more info on Mod Podge? Click here

Have you decoupaged photos or worked with wooden painting panels before? How did it go? Is it something you would try again?

No comments:

Post a Comment